Proxmox 8.x on Orange Pi 5 with Debian 12 Bookworm …
Blog Posts
Intro I’ve decided it’s about time to finish my Domoticz setup and connect all my devices to it. I just did it and this post is about the setup. I currently have several sensor boards with ESP8266 that I made for measuring mostly the temperature and also several ESPurna– based Sonoff switches ( controlling boilers, water pumps, and heating ), which I wanted to connect in one app and have an overview, control from mobile, etc. I have an all-time …
I recently started playing with ESP8266 and really like it. So I decided to make a simple OpenSenseMap temperature and pressure ( and humidity with BME280 ) stand-alone device. The idea was to have it run off battery for a long period of time and if needed, to charge it via solar panel(s). I decided to go with ESP-12S, which is bare-bone ESP and does not have usb input or any other schematics like Wemos D1 or similar. That’s the …
I had some time, so I decided to make an on/off program for my SonOff switch that I want to use to turn on / off the boiler heating at my house ( I use the stronger one, that has support for 16A load). My SonOff is pre-configured already with ESPEasy and rules. What I will be making is a very simple iOS app that has a toggle button on it. First, some basics: Reading the current state: http://192.168.88.171/control?cmd=status,gpio,12 Changing the …